By: Dave Toht

Published: March 18, 2010

Well-planned outdoor lighting improves curb appeal, safety, and security for your home.

Mimicking moonlight

Much of the success of exterior lighting hinges on its design. Hang around lighting designers long enough and you’ll hear a lot of talk about “moonlight effect.” That’s a naturalistic look that features light no more intense than that of a full moon, but still strong enough to make beautiful shadows and intense highlights.

Other techniques outdoor lighting designers use:

• Highlight trees: Whether illumined from below or given presence by a light mounted in the tree itself, trees make stunning features.

• Use uplights: Uplighting is dramatic because we expect light to shine downward. Used in moderation, it’s a great way to highlight architectural and landscaping features.

• Have a focus: The entryway is often center stage, a way of saying, “Welcome, this way in.”

• Combine beauty and function: For example, adding lighting to plantings along a pathway breaks up the “runway” look of too many lights strung alongside a walk.

• Vary the fixtures: While the workhorses are spots and floods, designers turn to a wide range of fixtures, area lights, step lights, and bollards or post lights.

• Stick to warm light: A rainbow of colors are possible, but most designers avoid anything but warm white light, preferring to showcase the house and its landscape rather than create a light show.

• Orchestrate: A timer, with confirmation from a photocell, brings the display to life as the sun sets. At midnight it shuts shut down everything but security lighting. Some homeowners even set the timer to light things up an hour or so before dawn.

Adding safety and security

Falls are the foremost cause of home injury, according to the Home Safety Council. Outdoors, stair and pathway lighting help eliminate such hazards.

Often safety and security can be combined. For example, motion-detecting security lighting mounted near the garage provides illumination when you get out of your car at night; the same function deters intruders. Motion detecting switches can also be applied to landscape lighting to illumine shadowy areas should anyone walk nearby.

Even the moonlight effect has a security function: Soft, overall landscape lighting eliminates dark areas that might hide an intruder, exposing any movement on your property. Overly bright lights actually have a negative effect, creating undesirable pockets of deep shadow.

Switching to LEDs

Once disparaged for their high cost and cold bluish glow, LEDs are now the light source of choice for lighting designers. “They’ve come down in price and now have that warm light people love in incandescent bulbs,” says Paul Gosselin, owner of Night Scenes Landscape Lighting Professionals in Kingsland, Texas. “We haven’t installed anything but LEDs for the last year.”

Although LED fixtures remain twice as expensive as incandescents, installation is simpler because they use low-voltage wiring. “All in all, LEDs cost only about 25% more to install,” Gosselin says. “And they’ll save about 75% on your electricity bill.”

Another advantage is long life. LEDs last at least 40,000 hours, or about 18 years of nighttime service. With that kind of longevity, “why should a fixture have only a two-year warranty?” asks Gosselin. He advises buying only fixtures with a 15-year warranty, proof that the fixture’s housing is designed to live as long as the LED bulbs inside.

Innovations

The growing popularity of exterior lighting has led to innovative fixtures. Here are some bright new ideas:

• Solar lighting: When first introduced, solar pathway lights produced a dull glow that rarely made it through the night. They do much better now that they are equipped with electricity-sipping LEDs, more efficient photovoltaic cells, and better batteries. Still, they have yet to measure up to hard-wired systems.

• Hybrids: Porch lights now come equipped with LED lighting for all night use, and a motion sensor that clicks on an incandescent bulb to provide extra illumination as you approach the front door. Hybrids use about 5% of the power a solely incandescent fixture requires.

• Barbecue light: Tired of grilling steaks by flash light? Now you can buy a gooseneck outdoor light, ideal for an outdoor kitchen.

Estimating the cost

Total outdoor lighting costs will vary according to the size of your home and the complexity of your lighting scheme. Expect to pay about $325 for each installed LED fixture. LEDs also require a transformer to step the power down from 120 volts to 12 volts, running about $400 installed.

A motion detector security light costs about $150 installed. Porch lights and sconces range from $100 to $250 installed, depending the fixture and whether running new cable is necessary.

Contractor-installed outdoor lighting for an average, two-story, 2,200 sq. ft. house might add up as follows:

• 7 fixtures to cover 100 feet of LED pathway lighting: $2,275

• Transformer: $400

• 4 LED uplights to dramatize the front of the house: $1,300

• 2 LED area lights for plantings: $650

• 2 motion detector security lights: $300

Total cost: $4,925

Dave Toht has written or edited more than 60 books on home repair and remodeling, including titles for The Home Depot, Lowe’s, Better Homes & Gardens, Sunset, and Reader’s Digest. A former contractor, Dave was editor of Remodeling Ideas magazine and continues to contribute to numerous how-to publications.

Visit Houselogic.com for more articles like this. Reprinted from HouseLogic.com with permission of the NATIONAL ASSOCIATION OF REALTORS®

Read more: http://members.houselogic.com/reprint-rights/#ixzz170sPu26f

The American Bungalow, or Craftsman home, grew out of the Arts and Crafts Movement of the late 19th century. The movement rejected the Industrial Revolution’s increasingly ornate machine-made products and the overly decorated, impractical architecture of the Victorian era.

The word “bungalow” originates in India and refers to a simple, low-built structure with porches on the outside. The American Bungalow emphasized a visibly sturdy structure, clean lines, natural materials, simplicity and efficiency. Use of space was maximized by clustering the kitchen, dining area, bedrooms and bathrooms around a central living area.

The American Bungalow also reflected a changing America — members of a growing middle class who sought an affordable home of their own where they could raise a family. This meant a floor plan integrating the kitchen with the common areas providing easy sight lines of the dining and living rooms so one could easily watch the children while preparing meals.

The American Bungalow was immensely popular. Kit homes that suppliers could ship anywhere in the country led to “bungalow mania” in the 1910s and 1920s. Sears was the most prominent supplier of these kits and reportedly sold more than 100,000 homes between 1908 and 1940. Sears bungalows are now highly prized by bungalow enthusiasts.

The American Bungalow has a distinctive style: a low, gently slopping roof, usually one story (some Bungalows have attics and dormer windows), wide overhanging eaves, exposed rafters (rafter tails), an incised porch (set beneath the roof) and tapered or square pillars (corbels) supporting the roof. Throughout the interior, designers showcased the wooden craftsmanship with exposed beam ceilings and built-in cabinetry, shelves and benches.

Brought to you by: Kimberly Coleman, Branch Manager of Prospect Mortgage.